Supply Air Black Stretch Wrap Film, 5 Inch x 1000 Feet, 80 Gauge Hand Stretch Film with Handle

Highlights

• 5 INCH × 1000 FEET BLACK STRETCH FILM: Each roll measures 5 inches wide by 1000 feet long, manufactured from 80 gauge (20.32 micron) linear low-density polyethylene. Black opaque pigmentation is compounded throughout the film to block contents from view during palletizing, bundling, and transit
• 80 GAUGE FILM THICKNESS: Film is extruded at 80 gauge thickness (20.32 microns). Polyethylene film stretches up to 300 percent of resting length before break. Cling adhesion is engineered into one side for layer-to-layer bonding without separate adhesives
• EXTENDED CORE WITH INTEGRATED HANDLE: Each roll includes a 3-inch outer diameter cardboard core with 1-inch inner bore. Core extends 3 inches beyond film edge on each side. Integrated plastic handle attaches to core for hand-wrapping without a dispenser
• HAND-WRAP APPLICATION: Film is applied by walking around the load while maintaining tension on the roll. Each wrap layer overlaps the previous layer by approximately 50 percent. The elastic memory of the polyethylene creates compression around the load as the film attempts to return to resting length
• MATERIAL CONSTRUCTION: Linear low-density polyethylene resin is extruded into continuous film. Film thickness is consistent across the width and length of each roll. One side is treated for cling adhesion; the opposite side remains low-friction to allow layers to slide during application

Description

Supply Air black stretch wrap film measures 5 inches wide by 1000 feet long per roll. The film is manufactured from linear low-density polyethylene at 80 gauge (20.32 micron) thickness. Each roll includes an extended 3-inch diameter cardboard core with integrated plastic handle for hand-wrapping applications. The black opaque film blocks contents from view during storage and transit. The film exhibits elastic memory and clings to itself when wrapped around loads. The polyethylene film stretches up to 300 percent of its resting length before break. Cling adhesion is engineered into one side of the film to create layer-to-layer bonding without separate adhesives. The roll core extends 3 inches beyond the film edge on each side to serve as grips during application. The film is applied by walking around the load while maintaining tension on the roll. Each complete wrap layer overlaps the previous layer by approximately 50 percent. The black pigmentation is compounded throughout the polyethylene resin. Film thickness is consistent across the width and length of each roll. The cardboard core measures 3 inches in outer diameter with a 1-inch inner diameter bore. Manufactured in the United States. Available in multiple pack quantities.